A Study on convection in molten zone of aluminum alloy during Fe/Al resistance spot welding

Iyota, Muneyoshi*; Matsuda, Tomoki*; Sano, Tomokazu*; Shigeta, Masaya*; Shobu, Takahisa; Yumoto, Hirokatsu*; Koyama, Takahisa*; Yamazaki, Hiroshi*; Semba, Yasunori*; Ohashi, Haruhiko*; et al.

Journal of Manufacturing Processes, 94, p.424 - 434, 2023/05

https://doi.org/10.1016/j.jmapro.2023.03.032

New measurement system based on small-angle neutron scattering for structural analysis of light-responsive materials

Iwase, Hiroki*; Akamatsu, Masaaki*; Inamura, Yasuhiro; Sakaguchi, Yoshifumi*; Morikawa, Toshiaki*; Kasai, Satoshi*; Ouchi, Keiichi*; Kobayashi, Kazuki*; Sakai, Hideki*

Journal of Applied Crystallography, 56(1), p.110 - 115, 2023/02

https://doi.org/10.1107/S1600576722011104

With the increasing importance of light-responsive materials, it is vital to analyze the relationship between function and structural changes induced by light irradiation. Small-angle scattering (SAS) is effective for such structural analysis. However, quantitatively capturing local molecular structure formation and molecular reactions at a scale of less than 1 nm via SAS is difficult. In this study, to analyze the structure of non-equilibrium phenomena in light-responsive materials, a new sample environment has been developed for a time-of-flight small- and wide-angle neutron scattering instrument (TAIKAN), comprising a UV-Vis irradiation system, UV-Vis absorption measurement equipment and photodetector. Simultaneous measurement of small-angle neutron scattering and UV-Vis absorption was achieved. This system was used to demonstrate the in situ observation of UV-Vis irradiation-induced structural change of micelles formed by a light-responsive surfactant sample in an aqueous solution.

Safe, efficient cementation of challenging radioactive wastes using alkali activated materials with high-flowability and high-anion retention capacity (Contract research); FY2021 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Hokkaido University*

JAEA-Review 2022-050, 116 Pages, 2023/01

JAEA-Review-2022-050.pdf:11.41MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2019, this report summarizes the research results of the "Safe, efficient cementation of challenging radioactive wastes using alkali activated materials with high-flowability and high-anion retention capacity" conducted from FY2019 to FY2021. Since the final year of this proposal was FY2021, the results for three fiscal years were summarized. The present study aims to explore alkali activated materials with high anionic nuclide retention and flowability and their recipes for safe storage and disposal of iron flocculant from the water treatment facility at 1F, and to propose a design of a solidification device that is feasible as an actual plant. In order to achieve these objectives, the following five items were carried out in this study.

Development of the technology for preventing radioactive particles' dispersion during the fuel debris retrieval (Contract research); FY2020 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2022-010, 155 Pages, 2022/06

JAEA-Review-2022-010.pdf:9.78MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of the technology for preventing radioactive particles' dispersion during the fuel debris retrieval" conducted from FY2018 to FY2021 (this contract was extended to FY2021). Since the final year of this proposal was FY2021, the results for four fiscal years were summarized. The present study aims to clarify the behavior of microparticles in gas and liquid phases in order to steadily confine radioactive microparticles during fuel debris retrieval in Fukushima Daiichi Nuclear Power Station, TEPCO. As measures to prevent dispersion of microparticles, (1) a method to suppress the dispersion with minimum amount of water utilizing water spray etc., and (2) a method to suppress the dispersion by solidifying ...

Growing need for humanities and social science studies in uranium waste disposal

Yasuda, Hiroshi*; Fumoto, Hiromichi*; Saito, Tatsuo

Nihon Genshiryoku Gakkai-Shi ATOMO, 63(8), p.610 - 614, 2021/08

https://doi.org/10.3327/jaesjb.63.8_610

Regarding the handling of uranium bearing waste, which is contaminated with uranium, which is a naturally occurring radionuclide, and its descendant nuclides, in recent years, the Japan Nuclear Regulatory Commission, etc. have been carefully and actively deliberated based on the knowledge of natural science and safety engineering. It was carried out, and as of March 2021, a certain policy has been shown. On the other hand, when disposing of uranium waste, which may cause dose exposure to future generations, the authors consider not only the science and engineering perspectives that have been conducted so far, but also the humanities and social science perspectives. We have been discussing with experts in related fields, thinking that it is necessary. In this report, we will introduce the background that brought about such an idea and the direction of future discussions.

Unified mercury radioactivity monitoring system at J-PARC and its operation experiences

Harada, Masahide; Sekijima, Mitsuaki*; Morikawa, Noriyuki*; Masuda, Shiho; Kinoshita, Hidetaka; Sakai, Kenji; Kai, Tetsuya; Kasugai, Yoshimi; Muto, Giichi*; Suzuki, Akio*; et al.

JPS Conference Proceedings (Internet), 33, p.011099_1 - 011099_6, 2021/03

https://doi.org/10.7566/JPSCP.33.011099

In MLF at J-PARC, a unified mercury radioactivity monitor (UHAM) is installed to find an indication of failure of the mercury target and loop system by detecting radioactive materials leaked from the system with a -ray energy analysis with Germanium semi-conductor detectors (Ge detectors). It is composed of three units of sampling port and radiation monitors: (1) HAM for interstitial helium gas layer between the mercury vessel and surrounding water shroud of the mercury target, (2) CAM for atmosphere in the hot cell where the target loop is operated and (3) VAM for helium gas in the helium vessel where the target vessel is installed. Once any leakages of radioactive materials are detected, an alarm signal is issued immediately to the accelerator control system to stop beam operation. Software and hardware have been upgraded yearly. For example, two Ge detectors are used for HAM for redundancy, NaI Scintillation detectors are also used as supplemental for the Ge detector to keep availability of the system for high counting rate event. In April 2015, the UHAM activated when a small water coolant leakage from the water shroud of the mercury target occurred. VAM detected an abnormal increase of the counting rate in the helium vessel. It was also indicated that the measured radioactive nuclides were generated from the activation of the coolant (water) in the water shroud and not from the mercury.

Monte Carlo criticality calculation of random media formed by multimaterials mixture under extreme disorder

Ueki, Taro

Nuclear Science and Engineering, 195(2), p.214 - 226, 2021/02

https://doi.org/10.1080/00295639.2020.1801000

A dynamical system under extreme physical disorder has the tendency of evolving toward the equilibrium state characterized by an inverse power law power spectrum. In this paper, a practically implementable three-dimensional model is proposed for the random media formed by multi-materials mixture under such a power spectrum using a randomized form of Weierstrass function, its extension covering the white noise, and partial volumes pairings of constituent materials. The proposed model is implemented in the SOLOMON Monte Carlo solver with delta tracking. Two sets of numerical results are shown using the JENDL-4 nuclear data libraries.

Development of imaging system with ultra-high spatial resolution aiming to detect alpha-dust (Contract research); FY2018 Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development

Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*

JAEA-Review 2019-038, 57 Pages, 2020/03

JAEA-Review-2019-038.pdf:4.6MB

JAEA/CLADS, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of Imaging System with Ultra-high Spatial Resolution Aiming to Detect Alpha-dust". In the present study, we have developed a prototype of a system aiming to elucidate the behavior of alpha-dust generated at the time of debris retrieval. In this system, alpha-ray is first converted to visible light by novel scintillator. Then, imaging with ultra-high resolution will be possible using a lens and an Si-semiconductor camera (CMOS camera). Also, it will be possible to identify the species of alpha-ray emitting nuclides by unfolding of the spectra. The demonstration tests of the system will be conducted for dust samplers at the Plutonium Fuel Development Center, JAEA. In the development of the present system, it is important to use scintillator whose emission wavelength is sensitive to the CMOS camera as well as high emission scintillator. Considering these conditions, the key technology will be the improvement of the purity of crystals and optimization of the shapes of the materials including powers.

Development of JAEA sorption database (JAEA-SDB); Update of sorption/QA data in FY2019

Sugiura, Yuki; Suyama, Tadahiro*; Tachi, Yukio

JAEA-Data/Code 2019-022, 40 Pages, 2020/03

JAEA-Data-Code-2019-022.pdf:2.22MB

Sorption behavior of radionuclides (RNs) in buffer materials, rocks and cementitious materials is one of the key processes in a safe geological disposal. This report focuses on updating of JAEA sorption database (JAEA-SDB) as a basis of integrated approach for the performance assessment (PA)-related distribution coefficient (K) setting and development of mechanistic sorption models. K data and their quality assurance (QA) results were updated by focusing on the following systems as potential needs extracted from our recent activities on the K setting and development of mechanistic models, i.e., clay minerals, sedimentary rocks and cementitious materials. As a result, 6,702 K data from 60 references were added and the total number of K values in JAEA-SDB reached 69,679. The QA/classified K data reached about 72% for all K data in JAEA-SDB.

Stabilization of lead with amorphous solids synthesized from aluminosilicate gel

Sato, Junya; Shiota, Kenji*; Takaoka, Masaki*

Journal of Hazardous Materials, 385, p.121109_1 - 121109_9, 2020/03

https://doi.org/10.1016/j.jhazmat.2019.121109

Lead is a hazardous heavy metal that can be stabilized by incorporation into the matrix of aluminosilicate bearing phases as they solidify. The actual mechanism by which lead is stabilized, however, continues to be unclear because the individual mechanisms of Pb incorporation into crystalline and amorphous aluminosilicate phases have not yet been studied separately. A detailed investigation of the incorporation of Pb into the amorphous phase of aluminosilicate solids was therefore performed. Amorphous aluminosilicate solids were synthesized with 0.7, 1.5, and 3.7 wt% of Pb from aluminosilicate gel produced from chemical reagents. Based on Raman spectroscopy, the Si-O stretching vibration bond shifted to lower wavenumbers with increasing Pb concentration. This shift suggested that covalent bonding between Pb and O in the matrix of the aluminosilicate solids increased. In addition, sequential extraction revealed that most of the Pb (75-90%) in the aluminosilicate solids was in a poorly soluble form (i.e. reducible, oxidizable, and residual fractions). These findings indicate that most of Pb is bonded covalently to the amorphous phase in aluminosilicate solids.